
This is a new generatation digital amplifier.Cost effective and high power are its advantage comparing to the old . What makes it happen? That a spectacular circuit with high rail voltage to drive ic makes the amplifier work stable in high power for long time. With innovative design, you can enjoy the power all time.
SPECIFICATIONS | |||
STEREO MODE | A2 | A 3 | A 4 |
8ohms (RMS/THD 1%) | 250Wx2 | 350Wx2 | 450Wx2 |
4ohms (RMS/THD 1%) | 400Wx2 | 600Wx2 | 700Wx2 |
Signal to Noise | >95dB | ||
Input Sensitivity | 1.1v | ||
Gain @ 8homs | 38dB | ||
Output Circuitry | CLASS D UN-BRIDGED | ||
Minium Load | 1.3ohm | ||
Distortion | Less than 0.02% | ||
Frequency Response | 10Hz-40KHz @ 8ohms ±0.5dB | ||
Damping Factor (@100Hz) | >600 | ||
Input Impedance | Balanced 20K/ Unbalanced 10K | ||
Switching Rate | 50V/us | ||
High Filter | n/a | ||
Cooling | Variable-speed fan, rear-to-front air flow | ||
Input Connectors, each channel | XLR male & female | ||
Output Connectors, each channel | speakon | ||
Rear Panel Swithches | mono/stereo | ||
Front Panel Controls | Gain Attenuator: 0 to ∞ dB Power On/Off | ||
Front Panel Indicators | Protect (PRO),CLIP (CLIP),Signal (SIG) and Active (Act) | ||
Protection | |||
Amplifier Protection | Full short circuit, thermal, infrasonic, ultrasonic,VHF,vol.gain gradually | ||
Load Protection | DC fault power supply,switching power supply under voltage | ||
Infrasonic | -3 dB, 5 Hz | ||
DC fault | Power supply shutdown | ||
Ultrasonic | -3 dB, 85 kHz | ||
Short Circuits | active clip limiting, recover after limiting | ||
Thermal | no output at 95°C, re-work less than 95°C | ||
Over Current | auto limit | ||
PHYSICAL | |||
SHIPPING WEIGHT (kgs) | 7 | 8 |
Professional amplfier manufacturer and supplier, digital amplifier manufacturer and supplier, audio amplifier manufacturer and supplier.