
Add to Cart
The FP multi-channel switching amplifier can realese over 10k power stably to your speakers. Comparing to normal digital amplifier, it can supply you rich bass for subwoofer and transparent hi and mid frequency.
SPECIFICATIONS | |||||
STEREO MODE | FP4.800 | FP4.1000 | |||
8ohms (RMS/THD 1%) | 800Wx4 | 1300Wx4 | |||
4ohms (RMS/THD 1%) | 1350Wx4 | 2200Wx4 | |||
2ohms | 2000Wx4 | 2500Wx4 | |||
BRIDGE MONO MODE | |||||
8ohms | 2700Wx2 | 4400Wx2 | |||
4ohms | 3100WX2 | 5000Wx2 | |||
Signal to Noise | 110dB | ||||
Output Circuitry | Class d | ||||
Distortion | Less than 0.02% | ||||
Frequency Response | 20Hz-20KHz @ 8ohms ±0.5dB | ||||
Damping Factor (@100Hz) | >300 | ||||
Input Impedance | Balanced 20K/ Unbalanced 10K | ||||
Cooling | Variable-speed fan, rear-to-front air flow | ||||
Protection | |||||
Amplifier Protection | Full short circuit, thermal, infrasonic, ultrasonic,VHF,vol.gain gradually | ||||
Load Protection | DC fault power supply,switching power supply under voltage, | ||||
Infrasonic | -3 dB, 5 Hz | ||||
DC fault | Power supply shutdown | ||||
Ultrasonic | -3 dB, 85 kHz | ||||
Short Circuits | active clip limiting, recover after limiting | ||||
Thermal | no output at 95°C, re-work less than 95°C | ||||
Over Current | auto limit | ||||
PHYSICAL | |||||
SHIPPING WEIGHT (kgs) | 13KG | ||||
SHIPPING SIZE ( WxDxH mm) | 483x377x210 |
All Specification Subject to Change Without Notice.
Professional amplfier manufacturer and supplier, digital amplifier manufacturer and supplier, audio amplifier manufacturer and supplier,professional audio amplfier manufacturer,class td amplifier